MOL Farm Grease 2MG
lithium-base lubricating grease
MOL Farm Grease 2MG multipurpose lubricating grease produced from highly refined mineral oil and a lithium 12-hydroxystearate based thickener. It contains additives that reduce wear, inhibit oxidation and corrosion as well as EP additive, to ensure its outstanding performance. It has improved load carrying capacity due to its molybdenum-disulfide and fine graphite content. It is a moderately soft, smooth, black color lubricating grease. The temperature range of application is between -25 °C and +140 °C.
Applications
- Equipment subject to high risk of seizure
- Low speed bearings exposed to dynamic loads
- Sliding parts of chassis, bogies
- Screw threads, small gear wheels, springs
- Individual lubrication systems
Product features | Benefits |
---|---|
High performance solid additive content |
|
Excellent wear protection |
|
Excellent load-carrying properties |
|
Good mechanical and storage stability |
|
Excellent static water resistance |
|
Excellent corrosion protection |
|
Excellent yellow metal compatibility |
|
Data sheets
Letölthető anyagok
- Technical Data Sheet - MOL Farm Grease 2MG (pdf, 152 kb)
- Spec MOL Farm Grease 2MG (pdf, 206 kb)
- Safety Data Sheet - MOL Farm Grease 2MG (pdf, 281 kb)
- Archive Safety Data Sheet 6 - MOL Farm Grease 2MG (pdf, 403 kb)
- Archive Safety Data Sheet 5 - MOL Farm Grease 2MG (pdf, 402 kb)
- Archive Safety Data Sheet 4 - MOL Farm Grease 2MG (pdf, 296 kb)
- Archive Safety Data Sheet 2 - MOL Farm Grease 2MG (pdf, 218 kb)
- Archive Safety Data Sheet 1 - MOL Farm Grease 2MG (pdf, 84 kb)
Performance levels, approvals
DIN 51502: KPF2N-25 ISO 6743-9: L-XBDEB 2 |
Typical properties
Appearance | black, homogenous |
---|---|
Base oil viscosity at 40 °C [mm2/s] | 200 |
Dropping point [°C] | 200 |
Penetration after 60 strokes at 25 °C [0,1 mm] | 280 |
Four ball test, weld load [N] | 3000 |
Four ball test 60 min/400 N wear diameter [mm] | 0,5 |
Timken OK load [kg] | 20 |
Oxidation stability at 100 h / 100 °C pressure drop [kPa] | 25 |
Corrosion at 100 °C/ 24 h (steel) | pass |
Copper corrosion (100 °C, 24 h) [grade] | 1 |
EMCOR test, distilled water [grade] | 0 |
Dynamic water - resistance at 79 °C [mass %] | 3 |
Static water resistance at 90 °C [grade] | 1-90 |
Oil separation [mass %] | 3 |
Graphite content [mass %] | 1 |
Molybdenum disulphide content [mass %] | 1 |