MOL DOT 4+

MOL DOT 4+

brake fluid

MOL DOT 4+ is a synthetic brake fluid based on polyglycol ether and polyglycol, containing oxidation, corrosion and foaming inhibitors, having an excellent humidity absorption ability and a dry boiling point of at least 260°C . It can be mixed with any brake fluid having the same specification.

MOL brake fluids: Extra performance for safer braking

Brake fluids are working fluids which are extremely important to active vehicle safety systems. They have to provide perfect protection and deliver high performance so as to guarantee effective braking and safe stops. Selecting the right quality and changing the brake fluid in a timely manner may save your life!

MOL brake fluids provide maximum performance and deliver reliable protection even under extreme loads:

  • Within the recommended change cycle, perfect water management capacity prevents formation of steam bubbles which can “soften” the braking system even in cases of intensive braking. It can also prevent generation of ice crystals deriving from water entering the braking system during extremely cold weather which means you do not suffer any disturbing results. These fluids provide maximum performance in all situations thus ensuring safe and trouble-free braking
  • They far out-perform requirements as defined by relevant international standards so  optimum braking efficiency is guaranteed
  • These fluids may also be perfectly applied to braking systems equipped with state-of-the-art safety equipment such as ABS, ESP, ASR, etc.
  • Corrosion inhibitor additives ensure high-level protection of metallic parts in the braking system, thus guaranteeing longer lifetimes for these components
  • They perfectly complement non-metallic structural materials, cause no damage to rubber and plastics components in the braking system and cause no changes in size and hardness.

Applications

  • Hydraulic brake and clutch systems in vehicles
  • Hydraulic brake equipment with anti-lock braking system (ABS) and active stability control (ASC)
Product featuresBenefits
Outstanding moisture absorbtion capacity
  • Prevents the formation of ice crystals at low temperatures and of steam bubbles at high temperatures
Excellent wear protection
  • Excellent protection for working cylinders of hydraulic brake systems
Low pour point
  • Pressure transmission is guaranteed down to -40 °C
Compatible with construction materials
  • There is no damage to the plastic and rubber parts of the brake system
Excellent corrosion protection
  • High-level protection of metal (cast iron, copper, zinc, cadmium, aluminium) parts
Are you using the right lubricant?

Data sheets

Performance levels, approvals

SAE J 1704
FMVSS 116
DOT 4
ISO 4925 Class 4

Typical properties

Appearanceyellow
Kinematic viscosity at 100°C [mm2/s]2,34
Kinematic viscosity at -40 °C [mm2/s]1315
pH value8,53
Boiling point [°C]270
Wet boiling point [°C]163
Density at 20 °C [g/cm3]1,04

Downloadable publications

Last thing you view

×