MOL Favorit 2

MOL Favorit 2

lithium complex lubricating grease

MOL Favorit 2 is a multipurpose lubricating grease produced from high refined mineral oil and a lithium complex thickener. It contains additives that reduce wear, inhibit oxidation and corrosion, as well as EP additives and additive for improving adhesion in order to ensure outstanding performance.It has excellent mechanical stability, providing long term protection and lubrication. It is a moderately soft, brownish yellow coloured, fibre drawing lubricating grease. The temperature range of application is between -30 °C and +140 °C.

Applications

  • High temperature applications
  • Heavy-duty rolling bearings
  • Bearings of electromotors
  • Road and railway wheel bearings
  • Individual lubrication systems
Product featuresBenefits
Multipurpose lubricating grease
  • Wide range of applicability enables reduction of the number of lubricating oils
  • Warehousing and maintenance costs are reduced
  • Problems due to mixing of lubricating greases are minimized
Long lifetime
  • Re-greasing cycle time can be increased, economical application
Excellent mechanical and storage stability
  • Retains stable structure under load, so no softening of lubricating grease and no running off the lubrication point
  • Lubricating grease can be stored for long a period without oil separation, hardening or softening
Excellent load-carrying properties
  • Forms a continuous lubricating film that does not break even under dynamic load conditions
Excellent static water resistance
  • No softening or runing off the lubrication point in wet, humid environments
Excellent wear protection
  • Reduced wear of contacting surfaces, even under varying operating conditions
  • Improved operational safety and high level of availibility
Excellent tackiness
  • Forms a stable and uniform lubricating film, which is not squeezed from between contacting surfaces even under heavy loads
  • Prevents metallic contact at low speeds
Exceptional thermal and oxidation stability
  • No hardening of lubricating grease at high temperatures and minimum oil separation
Resistant to vibration
  • Lubricating grease structure remains stable; grease does not soften or run off the greasing point
Excellent corrosion protection
  • Extreme long term protection of steel and non-ferrous metal parts
Are you using the right lubricant?
Check it out
Contact

Data sheets

Letölthető anyagok

Performance levels, approvals

DIN 51502: KP2N-30
ISO 6743-9: L-XCDEB 2

Typical properties

Appearancebrownish yellow, tacky
Base oil viscosity at 40 °C [mm2/s]200
Dropping point [°C]270
Penetration after 60 strokes at 25 °C [0,1 mm]280
Penetration change after 10000 strokes at 25 °C [0,1 mm]20
Shell Roll stability (100 °C/24h) penetration change [0,1 mm]30
Four ball test, weld load [N]2800
Timken OK load [Lb]40
Oxidation stability at 100 h / 100 °C pressure drop [kPa]25
Copper corrosion (100 °C, 24 h) [grade]1
Dynamic water - resistance at 79 °C [mass %]2
Static water resistance at 90 °C [grade]1-90
Oil separation [mass %]0,5
Wheel Bearing Leakage [mass %]0,5

Downloadable publications

Recommended categories

Last thing you view

×